|
|
 |
 |
|
We make traditional wooden staircases and railings. Some of the configurations we make are straight, split with winders, split with platforms, curved and spiral. |
 |
|
Yes. Typically, we visit the site to take measurements and meet with a prospective client. We are also able to generate a quote based on architectural drawings. We provide a written estimate. (To request a field estimate, click here.) |
|
|
|
|
|
We are located in Maspeth (Queens County), New York. Please visit our contact section for detailed address information. |
|
|
Yes. We submit shop drawings to our clients for approval prior to production of most staircases. |
|
|
Yes. Please visit our In Detail section to read about our facility. |
|
|
Our stairs and rails are built to industry standards and intended to provide service for many years. We recommend that the client finish the stairs as soon as possible after installation, however. This is particularly important with staircases made from hard materials such as Brazilian Cherry or Santos Mahogany which tend to crack. Proper sealing helps to prevent this problem. |
|
|
Yes. We turn our own spindles and posts so we are able to match almost any design. Also, we do make single copies from client provided samples to match. |
|
|
Yes, most of our staircases are pre-assembled in our shop. When it is not possible to fit a full staircase into it’s final spot in one piece, we assemble it on site. Shop assembly results in higher quality staircases. |
|
|
No. All our railings are assembled on site. |
|
|
The production time required to build a staircase varies from several hours to several days. It depends on the staircase design. Also, our current workload is another determinant of production time. Typically, for staircases, our goal is two to three weeks from receipt of deposit and approved shop drawings to installation. Sometimes, due to circumstances beyond our control, delays are unavoidable. Clients with special scheduling needs should discuss this further with us prior to placing an order. |
|
|
The most common types of wood we employ are oaks, poplar, pine, mahogany, maple, and cherry. We are able to make staircaces from other types as needed. Please visit the Lumber Types section for more information. |
|
 |
|
 |
|
No. All of our stair and railing products are sanded with up to a 100 grid sand paper. The client is responsible for extra sanding, staining and/or sealing. |
|
|
|
|
|
Please consult with your local zoning board. Also, local architects should be able to furnish this information. We are the manufacturer and installer of custom staircases. It is the responsibility of the client to ensure compliance with local code(s). |
|
|
After our staircase is installed, the contractor must install temporary railing to protect visitors to the site. Many of our jobs call for the furnishing of a staircase only. Also, when we do provide the railing as well, it can be several weeks or months before the jobsite is ready for railing installation. The client must ensure safe jobsite environment. Specific related issues should be discussed with our staff. |
|
|
Pine is the most economical material we use. Boxed stair design is the simplest and least expensive. |
|
No. We are able to furnish simple metal railing, however. |
|
|
We are able to furnish pre-fabricated metal balusters with our custom handrail fitted on top. A selection of samples is available in our showroom. |
|
|
Wood is a natural product that is characterized by variety. No two boards of lumber are alike. While we always make the best effort to match them for color and grain, a completely uniform appearance cannot be achieved. Also, railing transition elements such as volutes, easements and quarter-turns are cut at different grain angles from straight pieces resulting in varied appearance. Clients overly concerned about this issue should discuss it with us prior to placing an order. |
|
|
Yes. However, since we do not perform general construction work such as framing or sheet rocking, clients should consult with a contractor if such work is needed. |
|
|
No. Clients must consult with a contractor of their choice in regards to general construction matters. |
|
|
Yes. We consider many factors when cost estimating a project. All jobs are different and we bid on them individually. Some estimates are negotiable. |
|
